Design Features:
1、 Ductile Iron body and bonnet for high strength and impact resistance . Valve Body and Bonnet Fusion bonded epoxy coating for long life corrosion protection. Straight through full bore to avoid debris traps, small flow resistance.
2、 Ductile Iron Wedge inside and outside fully rubberized with vulcanized EPDM or NBR ,suitable for potable water.
3、 Rubber bonnet gasket for longevity and protection of bonnet bolts, Isolated fasteners for corrosion protection.
4、 Stainless steel stem with rolling thread for high strength and corrosion resistance**.
5、 Back sealing facility to allow for replacement of seals under full operating pressure.
6、 Lower thrust washer to reduce friction.
7、 Ductile Iron Gland Thick Wall Casting, replaceable O rings.
8、 Dust Guard to prevent impurities from entering the stem sealing system.
9、 Brass bushing for alignment, low torque operation.
10、 Stem nut assembled downward.
11、Valve is supplied with hand wheel or bare shaft with square cap; Small operation torque, easy opening and closing.
Field of Application：
Size Range: DN40 and DN600
Maximum Temperature: 80˚C
Allowable Operating Pressure:PN10、PN16、PN25
Gate valve for use in irrigation, general utility services, HVAC and water systems
Features：
Bolted Bonnet
Replaceable O-ring
Rubber encapsulated wedge, Brass Wedge Nut.
Fusion bonded epoxy coated inside and outside , blue RAL 5017 200 Micron thick
Working pressure 250 PSI/17.2 Bar Non-Shock Cold
Technical Specification：
Valve design according to AWWA C515、AWWA C509
Face to face dimensions according to ANSI B16.10
Hydraulic test according to AWWA C515、AWWA C509、ISO5208
Standard flange drilling to ANSI B16.1、ANSI B16.42
MATERIAL LIST
| Item No. | Part Name | Specification |
| 1 | Body | Ductile Iron ASTM A536 65-45-12 |
| 2 | Wedge | Ductile Iron ASTM A536 65-45-12 |
| 3 | Wedge Coating | EPDM/NBR ASTM D2000 |
| 4 | Wedge Nut | Copper Alloy |
| 5 | Stem | Stainless Steel ASTM A276 SS410 |
| 6 | Bonnet Gasket | EPDM ASTM D2000 |
| 7 | Bonnet | Ductile Iron ASTM A536 65-45-12 |
| 8 | O Ring Back Sealing | EPDM ASTM D2000 |
| 9 | Stem Washer | PEFE |
| 10 | O-Ring | EPDM ASTM D2000 |
| 11 | O-Ring | EPDM ASTM D2000 |
| 12 | Gland Flange | Ductile Iron ASTM A536 65-45-12 |
| 13 | Dust Guard | EPDM ASTM D2000 |
| 14 | HandWheel | Ductile Iron ASTM A536 65-45-12 |
| 15 | Stem Cap | Ductile Iron ASTM A536 65-45-12 |
