JDX type reducing rubber joint

Size Range: 2" * 1 1/4"*-24" * 20"/DN50*32-DN600*500

Rubber Body Outer Layer: NR/EPDM/IIR/CR/NBR/VITON

Rubber Body Inner Layer: NR/EPDM/IIR/CR/NBR/VITON

Skeleton: Nylon

Flange: Q235/SS304/SS316

Ring: Steel

Payment: T/T, D/P or L/C

Lead Time：5-30 days

Description

Design Features:

1. Small size, light weight, good flexibility, easy installation and maintenance.

2. After installation, it can absorb the horizontal, axial and angular displacement caused by the vibration of the pipeline; it is not restricted by the non-concentricity of the pipeline and the non-parallel flange.

3. After installation, it can reduce the noise generated by the vibration of pipes, pumps, etc., and has a strong vibration absorption capacity.

4. The internal seamless high-pressure rubber joint can more effectively prevent the corrosive medium from corroding the inner wall of the rubber joint in high temperature, acid and alkali resistant, and oil resistant pipelines, and improve the service life.

Field of Application：

Size Range: 2" * 1 1/4"*-24" * 20"/DN50*32-DN600*500

Maximum Temperature: -15℃-(+)120˚C

Allowable Operating Pressure: 0.25MPa/0.6MPa/1.0MPa/1.6MPa/2.5MPa/6.4MPa

ZG rubber joints have good comprehensive performance and are widely used in basic projects such as chemical industry, construction, water supply, drainage, petroleum, light and heavy industry, refrigeration, sanitation, plumbing, fire protection, and electric power. According to different materials, it can be made into various varieties such as acid resistance, alkali resistance, corrosion resistance, oil resistance, high temperature resistance, radiation resistance, abrasion resistance, and aging resistance, which can be adapted to various media and environments.

Features：

Note:The joints above DN200 used in high pressure and high building,anti-pull-off device should be installed if the pipe has no fixed stay or fixed bracket(actual axial force of the product is less than anti-supporting force).

Technical Specification：

Design Standard：GB/T26121

Face to Face Dimension：GB/T26121

Connection Type：GB/T9115.1-2000, HG, ANSI, DIN, BS, EN, JIS

Test Standard：GB/T26121

MATERIAL LIST

Name	Material
Outer	IIR/CR/EPDM/NR/NBR
Inner	IIR/CR/EPDM/NR/NBR
Skeleton	Nylon
Flange	Q235/SS304/SS316L
Ring	Steel

Dimensions (mm)

Nominal diameter DN	Length L（mm）	Axial displacement		Lateral displacement(mm)	Deflexion angle(a1+a2)°
DN₁XDN₂	Length L（mm）	Extension	Compression	Lateral displacement(mm)	Deflexion angle(a1+a2)°
50×32	180	20	30	45	35
50×40	180	20	30	45	35
65×40	180	20	30	45	35
65×50	180	20	30	45	35
80×40	180	20	30	45	35
80×50	180	20	30	45	35
80×65	180	20	30	45	35
100×40	180	20	30	45	35
100×50	180	20	30	45	35
100×65	180	22	30	45	35
100×80	180	22	30	45	35
125×50	200	22	30	45	35
125×65	200	22	30	45	35
125×80	200	22	30	45	35
125×100	200	22	30	45	35
150x50	200	22	30	45	35
150×65	200	22	30	45	35
150×80	200	22	30	45	35
150×100	200	22	30	45	35
150×125	200	22	30	45	35
200×80	200	22	30	40	30
200×100	200	22	30	40	30
200×125	200	25	30	40	30
200×150	200	25	35	40	30
250×125	220	25	35	40	30
250×150	220	25	35	40	30
250×200	220	25	35	40	30
300×125	220	25	35	40	30
300×150	220	25	35	40	30
300×200	220	25	35	40	30
300×250	220	25	35	40	30
350×150	240	25	35	40	30
350×200	240	28	38	40	30
350×250	240	28	38	40	30
350×300	240	25	35	40	30
400×200	240	25	38	40	30
400×250	240	28	38	40	30
400×300	240	28	38	40	30
400×350	240	28	38	40	30
450×300	240	28	38	40	30
450×350	240	28	38	40	30
450×400	240	28	38	40	30
500×350	240	28	38	40	30
500×400	240	28	38	40	30
500×450	240	28	38	40	30
600×400	240	28	38	40	30
600×450	240	28	38	40	30
600×500	240	28	38	40	30